Updates » BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

#1 by cquante , Mon Oct 04, 2021 1:21 pm

This update fixes some bugs reported by @Mr.T and @R.Tumanov . Thank you for your bug reports!

#2 by darek.niemiec , Tue Oct 05, 2021 1:11 pm

Hi,
A lot of signals (inputs, outputs, internals) was move to boolean signal and I had to couple times moved manually them because after regeneration of the project they back to boolean area
For ex. Slid1OdbOK is now on boolen area and have value 1034 .
The orginal project was prepared on 0.9.6.5 version

#3 by cquante , Wed Oct 06, 2021 7:35 am

Hi,

thank you for your report!

Zitat von darek.niemiec im Beitrag #2

A lot of signals (inputs, outputs, internals) was move to boolean signal and I had to couple times moved manually them because after regeneration of the project they back to boolean area
For ex. Slid1OdbOK is now on boolen area and have value 1034 .
The orginal project was prepared on 0.9.6.5 version

I cannot reproduce that behaviour. To test I opened a very old project and all signals are assigned well. I did a generation / regeneration process and all signals stayed as they are. After that test I generated a new project file (from template) and added a signal. Then I did a generation / regeneration and the signal also stayed as it was.

We now need to find out what's the difference between your AS file and mine.

Is it possible to send me your AS file for checking and tracing? Please send it via a link in a private message.

#4 by cquante , Wed Oct 06, 2021 11:27 am

Hello @darek.niemiec ,

thank you for the AS file. I checked the file and there are SIGNALS defined as BOOL, so it is okay that K-IDE list that variables as bool variables even if they have valid signal numbers as values.

I did the following to your project file:

Removed the BOOL definition for all variables identified as signals
Opened the REALS list and selected all the variables previously removed from boolean list
Defined the selected variables to be signals
Saved the file
Reopened the file

Everything works as it should. The signals are now in the right list and did not jump back to boolean.

You mentioned you did a "Regeneration". Why did you do a regeneration? When starting a regeneration, all data in the project is overwrited using the data in the original AS file. If you change the data using the variable list of K-IDE and then do a regeneration without saving the file, you will loose all changes! Please take a look at the manual for keyword "generation" / "regeneration". In short: "regeneration" is a functionality for very rare use cases. In normal programming cases you should never use "regenerate".

#5 by dm.bogachev , Fri Oct 15, 2021 3:15 pm

Hello there!

I have a problem with "Execute program" window!
My Display resolution is 1920x1080

Can I fix it somehow?

#6 by cquante , Sat Oct 16, 2021 2:56 pm

Hi!

Zitat von dm.bogachev im Beitrag #5
I have a problem with "Execute program" window!
My Display resolution is 1920x1080

Can I fix it somehow?

You are right, the controls in that dialog didn't have the right places and sizes. I'll fix it soon. As a workaround just press <RETURN> in this dialog window.

Posts:	259
Date registered	12.20.2019

Posts:	259
Date registered	12.20.2019

Posts:	259
Date registered	12.20.2019

Posts:	18
Date registered	09.28.2021

Posts:	259
Date registered	12.20.2019

BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

RE: BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

RE: BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

RE: BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

RE: BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

RE: BETA / Update 1.0.0.38 - K-IDE V1.1 BETA 3

Please enter a reason for warning.


	K-IDE support forum Find all information about Kawasaki's Integrated Development Environment