K-IDE support forum
Find all information about Kawasaki's Integrated Development Environment

SAVE/LOAD in Progress

#1 by Roger_Kaisereng , Wed Jan 22, 2020 1:56 pm

Immediately after connecting to the robot, the error message SAVE/LOAD is in progress every time the robot is loaded.

|addpics|slc-1-062d.jpg-invaddpicsinvv|/addpics|



Roger_Kaisereng  
Roger_Kaisereng
Posts: 19
Date registered 01.22.2020

Last edited 01.22.2020 | Top

RE: SAVE/LOAD in Progress

#2 by Roger_Kaisereng , Wed Jan 22, 2020 4:38 pm

We had to restart the robot. It worked again after that.


Roger_Kaisereng  
Roger_Kaisereng
Posts: 19
Date registered 01.22.2020


RE: SAVE/LOAD in Progress

#3 by cquante , Sat Jan 25, 2020 9:37 am

Dear Roger,

welcome to the forum and thank you for your bug report!

The error message "SAVE/LOAD in progress" is shown when you try to upload or download data after the previous transfer was interrupted. So the reason for the error was the transfer before.

If you send data to the controller or you receive data from the controller, the controller will wait until all data is transferred before allowing a new transfer. If the connection is lost while transferring data to / from the controller, the controller waits until a timeout before a new SAVE or LOAD can be established. There are two ways to go on working after a broken transfer:

  1. Wait until the timeout occurs (that takes some minutes)
  2. Restart the robot controller


Christian Quante
Project Support & Development
Technical Department

Kawasaki Robotics GmbH
Rheiner Landstrasse 195A • 49078 Osnabrück
Germany


 
cquante
Posts: 305
Date registered 12.20.2019


   

Exception while loading data from robot after lost connection
Search functions sometimes does not show the correct positions



Xobor Xobor Community Software
Datenschutz